|
 SB-3163E-F4A3  Broşür (Tr) |
Broşür (En)
3U/16 bays, 4Gb/s Fibre to SATA II RAID 6
subsystem
Features
-
Supports RAID levels
0, 1, 0+1, 3, 5, 6 and JBOD
- Supports hot spare and automatic hot rebuild
- Allows online capacity expansion within the enclosure
- Local audible event notification alarm
-
Supports password protection and UPS connection
-
Built-in serial port interface / or Ethernet for remote event
notification
- Dual host channels support clustering
technology
- Tagged command queuing for 256 commands,
allows for
overlapping data streams
- Transparent data protection for all popular operating
systems
- RAID ADG provides the highest level of data
protection
- Supports multiple array enclosures per host
connection
- Instant availability and background
initialization
- Supports greater than 2TB per volume set
(64-bit LBA support)
- Supports 4K bytes/sector for
Windows up to 16TB per volume set
- Supports S.M.A.R.T,
NCQ and OOB Staggered Spin-up capable
drives
- Supports online
Array roaming
- Online RAID level/stripe size
migration
- Online capacity expansion and RAID level
migration simultaneously
- Online Volume Set
Expansion
Exceptional
Manageability
- The firmware-embedded Web Browser-based RAID manager
allows local or remote management
and configuration
- The firmware-embedded SMTP manager
monitors all system
events and user notification
automatically
- The firmware-embedded SNMP agent allows
remote to monitor
events via LAN with no SNMP agent
required
- Menu-driven front panel display
-
Innovative Modular architecture
RAID Function
-
New disk auto spare
- Host independent
-
Environment monitor
- Online expansion
-
Continuous rebuild
- Online consistency check
-
Failed drive auto rebuild
- Failed drive
indicators
- Audible alarm
- Password
protection
- E-mail notification
- UPS
connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level migration
- Background RAID initialization
- S.M.A.R.T.
Specification
| Model |
SB-3163E-F4A3 |
|
Form-factor |
3U 19-inch rackmount
chassis |
|
RAID processor |
PowerPC
440SP |
|
RAID Level |
0,1,3,5,0+1,6,JBOD |
|
Cache memory |
512MB ~
4G |
|
No. of channels (host+drive) |
2 + 16 |
|
Host bus interface |
FC-AL (4
Gb/s) |
|
Drive bus interface |
SATA II |
|
Data transfer rate |
Up to
400MB/Sec |
|
Back plane board |
SATA II |
|
Hot-swap drive trays |
Sixteen (16) 1-inch
trays |
|
Hot-swap power supplies |
Two (2) 460W power supplies
w/PFC |
|
Cooling fans |
4 |
|
Battery backup |
Option |
|
Power requirements |
AC 90V ~ 264V Full Range
8A ~ 4A, 47Hz ~63Hz |
|
Environmental |
|
|
Relative Humidity: |
10% ~ 85% Non-condensing |
|
Operating Temp: |
10°C ~ 40°C (50°F ~ 104°F) |
|
Physical Dimensions: |
133(H) x 482(W) x 600(D)mm
5.24(H) x 18.98(W) x
23.62(D)inches |
| Weight |
20.5kgs / 45.1Lbs (without
drives) |
|
